Boot ChoOSer is a simple tool that will help you manage Windows NT’s multiple boot manager from inside Windows. You’ll find it useful if you have multiple versions of Windows installed on your computer, and frequently boot back and forth between them.
Without Boot ChoOSer, switching between operating systems requires being present — and paying attention — as your computer reboots, so that you can select the correct OS from NT’s boot menu. Set the delay too low, and you might miss it; set it higher, and your computer takes longer to boot. And if you’re using an operating system that was not the default at boot time, a computer restart will boot back into the default operating system, which can wreak havoc with installation programs and Windows NT’s crash-recovery features.
Without Boot ChoOSer, switching between multiple installations of Windows 9x is not even possible without manual editing of configuration files before you reboot.
With Boot ChoOSer, one click does the work, and your computer will restart into the chosen OS without any further input required. The new OS will remain the default until you again change OS’s with Boot ChoOSer (of course, you can still select a different OS at boot time).
Here are some key features of “Boot ChoOSer”:
￭ Sets reboot timer to 5 seconds to speed unattended reboots
￭ Can change default OS (for next boot) without rebooting
￭ Boldfaces current default operating system (so you’ll know which one starts after an unattended reboot)
￭ Fits on taskbar (to conserve screen space) if available; still works if not
￭ Manages multiple OS’s listed in BOOT.INI (for the Windows 2000/NT boot manager) and MSDOS.SYS (for the Windows 9x boot manager)
￭ Hotkey for quick access
Boot ChoOSer Crack Activation Key Free Download [Mac/Win] 2022
Boot ChoOSer is a small utility that will make it easier to switch between multiple versions of Windows NT or Windows 9x on your system. It is designed to be an optional tool for using NT’s multiple boot manager, and you can use it without rebooting your system. It will make it easier for you to select a different operating system at boot time.
Boot ChoOSer does not install any new files or registry entries on your system. If you have Microsoft Windows, it is optional. Please download the current version here: Download Boot ChoOSer
Issues and Bugs:
Any problems with the software? Please let me know by opening a new issue at GitHub.
1.2.2: Fixed bug that would prevent using a hotkey
1.2.1: Changed layout so it fits in TaskBar if available (1.0.2)
1.2.0: Added Hotkey to quick access (requires restart)
1.1.0: Made it download-only (requires restart)
1.0.2: Fixed bug with usage on shortcut
1.0.1: Made it install in Program Files
1.0.0: Initial release
Boot ChoOSer is a free, open-source, MIT-licensed product. You can use Boot ChoOSer in a commercial or non-commercial manner, and in any way you like as long as you provide appropriate attribution to “Boot ChoOSer”.
, I think that all of the chiefs should be made into a Tarzan movie. Not so much that a central character is made out of hundreds of characters, but that the producers can have fun with all of them. The simplicity that I’m talking about would allow for a more consistent action story, which might not require a central character, but would just be a series of cool and unique scenes. Think of:
– a Tarzan movie set in a jungle
– a Tarzan movie set in a snowscape
– a Tarzan movie set in a desert
– a Tarzan movie set in a shanty town
– a Tarzan movie set in an African jungle
– a Tarzan movie set in an American forest
– a Tarzan movie set in a very vast Scandinavian forest
– a Tarzan movie set in a Himalayan setting
These are just examples, but
Boot ChoOSer Keygen
Runs as a system service.
￭ MAIN: starts the service
￭ CLEAR: clears screen
￭ TIMER: sets delay timer
￭ CUSTOM: custom action
￭ ICONS: adds icons to StartMenu and StartUp dialog
￭ DIALOG: adds icon to Taskbar
￭ Hotkey: sets hotkey to start service
￭ STATUS: checks if service is running
Batch file syntax:
To run Boot Chooser as a system service:
BootChooser.bat MAIN / CLEAR / TIMER: 5 / CUSTOM / ICONS / DIALOG / HOTKEY
Batch file syntax to set/remove hotkey:
BootChooser.bat MAIN / CLEAR / TIMER: 5 / CUSTOM / ICONS / DIALOG / HOTKEY / [hotkey]
￭ If hotkey already set, will exit without changes
￭ If hotkey not set, will remove hotkey.
￭ If hotkey has no text, will leave hotkey unchanged.
￭ If hotkey is empty, will leave hotkey unchanged.
￭ If hotkey is empty, will leave hotkey unchanged.
￭ If hotkey is left unchanged, will remove hotkey.
￭ If hotkey is removed, will leave hotkey unchanged.
￭ Disk: lists configured OS’s and sets delay to 5 seconds.
￭ Reinstall: deletes all config files and resets service.
￭ Debug: allow you to choose / ignore Boot Chooser log messages.
￭ Discard [config files]: allows you to delete log files.
￭ Debug: allows you to turn on or off log messages.
￭ Exit: exits Boot Chooser and restarts Windows NT.
￭ Exit without Deleting: allows you to exit Boot Chooser but only delete log files.
￭ Restart: restarts Windows NT.
￭ Custom: allows you to run any subroutine you wish.
￭ Reset: clears all settings and resets Boot Chooser to default.
￭ Version: shows version info of Boot Chooser.
Boot ChoOSer Crack+ For Windows [Updated]
Boot ChoOSer is a boot-time utility that makes it easy to manage multiple Windows NT
booting versions. It can set the default OS to be booted next, or set a delay before the
booting OS is presented to the user.
The Windows 9x boot manager used by Windows 95/98/Me/NT/2000 and Windows NT/XP/Vista
is named “msdos.sys” in the Windows NT/XP/Vista “system32” directory. Windows 9x also
uses a configuration file, “boot.ini” in “c:\windows\system32\config”. This file
contains entries for Windows 9x/ME booting, DOS, Windows NT, and Windows 2000 boot
Since Windows NT booting is different than the Windows 9x booting, Boot Chooser
requires both files to be present. Boot Chooser has no knowledge of which entries are
9x or which are NT.
Boot Chooser also supports starting from either a DOS prompt, a Windows 9x boot disk,
a Windows NT boot disk, or any other type of operating system boot device.
The default delay value is 5 seconds, but you can change this setting by selecting the
Delay button on the Boot Chooser taskbar icon.
At a minimum, you will need a “booting” Windows 9x or Windows NT that is in a
multiboot configuration, which means that you need to be booted into the version of
Windows 9x or Windows NT you want to use as the default OS. You will also need the
boot.ini file for Windows 9x or Windows NT.
NOTE: An important requirement for getting Boot Chooser to work is that the Windows
9x or Windows NT booting is in a multiboot configuration. This is because the Windows
boot manager (and Boot Chooser) are looking for the OS’s boot entries in a particular
configuration. If you have a Windows 9x system that is not multiboot, Boot Chooser
will not work for it.
The Boot Chooser dialog box:
Open the Boot Chooser dialog box:
Choose which boot device you want to use:
Boot the selected OS:
The Boot Chooser icon:
Boot Chooser’s icon in the system tray:
1. Do not use Boot Chooser to change the default OS of a
What’s New in the Boot ChoOSer?
This is a free software to manage multiple Windows versions. Windows NT-based systems boot in several ways: the multi-boot boot.ini file and the MS-DOS-based boot.ini file (to be precise, Windows NT 3.1/3.5/4.0/4.1/2000).
The multi-boot boot.ini file usually contains information about the default Windows versions, but it can contain information about non-default Windows versions too (such as the Windows NT 3.51/4.01/2000 editions).
The MS-DOS boot.ini file contains information about the default MS-DOS version.
Boot ChoOSer allows you to switch between the two boot files, and it will also manage the boot.ini files of Windows NT’s service packs and updates. If Boot ChoOSer detects an installed version of Windows NT, it will include its boot.ini file into Boot ChoOSer’s menu (to save space).
Boot ChoOSer can also detect if an already installed version of Windows is active at boot, and it will set its delay to the specified number of seconds to speed unattended reboots (you must put in the value to speed up reboots, or you risk a reboot if the system gets to the BIOS before you).
Boot ChoOSer’s installation will also detect any additional boot.ini file, and will install it into Boot ChoOSer’s menu.
Boot ChoOSer’s installation will also add a hotkey to boot in the new operating system, if that system is installed.
Boot ChoOSer’s installation will also detect if you’re running an NT service pack or a Windows 2000/NT service pack. It will then include the Windows NT 3.51/4.01/2000/NT 5.0/NT 5.1/NT 5.2 boot.ini file into Boot ChoOSer’s menu, and it will detect if the service pack is installed.
Boot ChoOSer’s installation will also detect if you’re running a Windows 9x service pack or an NT service pack. It will then include the MS-DOS boot.ini file into Boot ChoOSer’s menu, and it will detect if the service pack is installed.
Boot ChoOSer’s installation will include Boot ChoOSer’s default boot.ini file into Windows NT’s System Configuration Utility (which you use to change the default boot operating system), and it will also include Boot ChoOSer’s boot.ini file in Windows NT’s Service Manager.
Boot ChoOSer Screenshots:
System Requirements For Boot ChoOSer:
OS: Windows 7/8/8.1/10
Windows 7/8/8.1/10 Processor: Dual Core Processor or equivalent
Dual Core Processor or equivalent Memory: 4 GB RAM
4 GB RAM Graphics: 4 GB DirectX 11 video card
4 GB DirectX 11 video card Hard Drive: 7 GB available space
Windows 7/8/8.1/10 Processor: Quad Core Processor or equivalent